show sctp connections
This command displays SCTP socket associations status.
Syntax
show sctp connections
Command Mode
Basic and Privileged User
Note
SCTP is applicable only to
Related Commands
(config-network)# sctp
Example
The example below displays the local SCTP endpoint (i.e., device) titled "Association #1", and the SCTP association status with the remote SCTP endpoint (proxy) titled "Association #2).
show sctp connections
---------------------------------------------------------------------
Association #1
Type: SERVER
State: LISTEN
Local Addresses: 10.55.3.80, 10.55.2.80
Local Port: 5060
---------------------------------------------------------------------
Association #2
Type: CLIENT
State: ESTABLISHED
Local Addresses: 10.55.3.80, 10.55.2.80
Local Port: 50226
Remote Addresses Configured State
10.55.1.100:5060 Yes INACTIVE - Primary
10.55.0.100:5060 Yes ACTIVE – Secondary